Based on your detected country, we suggest the draperinc.com domain for the best experience.

OptiView Matt White XT1000E

Matt White XT1000E diffuses light in all directions, so the image can be seen from any angle, making it the preferred viewing surface in educational and commercial markets. Offers accurate color rendition and superior clarity due to its smooth, non-embossed surface. Requires adequate provision for control of ambient light in the audience area. Unity gain with a panoramic 180° cone and is GREENGUARD Gold certified.

Overview

  • Maximum height without seams: 15' (457 cm).
  • Extra wide viewing cone. Typical contrast.
  • Gain: 1.0. Material does not reach half gain.


This surface is available on the following screens.

Motorized Screens
Access E
Access XL E
Acumen E
Acumen Recharge E
Acumen XL E
Nocturne+ E
Paragon E
Ropewalker
Targa
Targa XL
Ultimate Access E
Ultimate Access XL E
Manual Screens
Access M
Acumen M
Luma
Luma 2
Fixed Screens
Portable Screens
Diplomat/R (Carpeted Case)

GREENGUARD Certification

Related Documents

Decoding Viewing Surface Names

Each surface has a name that includes the characteristics it has. The following shows an example with definitions and examples of each area listed below.

Viewing Surface Key

X: Extra-wide. Half gain is greater than 60°

M: Moderate. Half gain is 30-60°

C: Controlled. Half gain is less than 30°

T: Typical. Surfaces with "typical" contrast are white in color and are generally recommended for use where ambient light is controlled.

H: High. Surfaces with "high" contrast usually have a grey surface or substrate. Their black retention is enhanced and they perform well under reasonable levels of ambient light.

S: Superior. This designation is reserved for surfaces with remarkable contrast and resistance to ambient light. Our "superior" surfaces will meet or exceed the contrast offered by any competitive viewing surface.

The numeric portion of the name is its typical peak gain x 1000. Gain levels of surfaces cover the full range from 0.6 to 3.2, and minor variations may occur between the samples. Lower gain surfaces offer excellent uniformity across wide viewing cones, for excellent edge blending and consistent reproduction with short throw projectors. Higher gain surfaces offer a more brilliant display in a variety of settings.

* Gain is a measure of reflected or transmitted brightness as compared to a block of magnesium carbonate, which serves as the industry's standard for gain of 1.0. A more familiar "real-world" comparison is with a matt white projection screen. Most matt white screens have a fairly uniform light distribution pattern with gain of approximately 1.0. Screens that appear brighter on axis are concentrating reflected light in a narrower area: the gain may be 2.5 on axis but 0.5 at 60° to the side.

Some viewing surface codes include an E or V suffix after the gain number.

E: Indicates a self-supporting viewing surface that is part of the OptiView family and/or suitable for Draper Series E non-tensioned screen models.

V: Indicates the surface is part of our OptiFlex family of tensioned surfaces and/or suitable for Draper Series V tensioned screen models.


Tech Data Sheet

PDF document OptiView_XT1000E.pdf

Viewing Surface Family

The OptiView family features front projection surfaces generally installed on operable roller screens with a dowel. The surfaces are self-supporting and do not require tensioning to lay flat. Most surfaces in this group have a tear proof fiberglass base textile. The OptiView family are extremely sturdy viewing surfaces for use in a variety of settings.
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman