Based on your detected country, we suggest the draperinc.com domain for the best experience.

Dual Roller Pocket Headbox

Combine two shades or a shade and screen in one recessed headbox, with installation during construction and roller setup later.

Maximize project space with the Dual Roller Pocket Headbox, by vertically stacking two shades or a shade and projection screen inside a single recessed headbox. Installation of the headbox can be done during the construction phase, saving shade roller set-up for a later date.
 

Product Specs

  • Standard headbox: 5-¾" (15 cm) wide x 7-¾” (20 cm) high for manual and motorized shades. Headbox will be bent steel or three-piece extruded aluminum. Dual Roller Endcaps used for mounting shade.
  • Large headbox: 6-½” (17 cm) wide x 8-½” high (22 cm) for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Ceiling brackets are used for this size.
  • Extra-large headbox: 8-22/32" wide x 7-3/4" high for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Dual Roller Endcaps are used for mounting shade.
  • Suspended or flush mounting available.
  • Dual Roller Pocket headbox is white (standard) or grey where visible at the ceiling line. Available with or without tile lip.
  • Accommodates: Motorized FlexShade, Clutch FlexShade, Battery Powered FlexShade, 24V FlexShade, and LightBloc w/Side Channels.
  • Shades may be coupled, minimizing wiring and motor use (not suitable with LightBloc).
  • Product designed for interior use.

ANSI/WCMA A100.1-2022 Child Safety Standard

Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022 child safety standard, all Draper window shades operated by a bead chain will be furnished with a tensioned hold-down device that is permanently attached and partially disables the product if not installed correctly. This hold-down should be installed with tension on the chain.

All bead chain operated window shades will include:

  • Permanently installed spring-loaded tensioned hold-down device
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using appropriate hardware for the site conditions. Consult with contractors and builders as needed.

If the tension device is not installed with appropriate tension on the bead chain, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain.

Approved permanent warning label

Learn more about the new child safety standard

At the link below, you can see more information about the new child safety standard, mounting methods for the tensioned hold-down device, alternatives to bead chain products, and more.

Click here for more information
Tensioned hold-down device

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

Skip Navigation Links.

Part Numbers

  • C177.249SA - Dual Roller Pocket Headbox, Manual Shades
  • C177.248SA - Dual Roller Pocket Headbox, Standard Motorized
  • C177.250SA - Dual Roller Pocket Headbox, Large Motorized
  • - Contact Draper for details

Videos

Case Studies

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

   

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.

What type of installation?

What's your question?

Tell us about yourself.



Your Drape‍r contact information:

Need to contact someone immediately? Your Draper contacts are shown below.

Mitch Photo
Mitch Broome
Regional Sales Manager - Architectural Products, Midwest USA
mitch.broome@draperinc.com
765.856.1245
Logo Photo
Architectural Sales Consultant Team
Contact Info:
commercialshades@draperinc.com
800-238-7999
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman