Product Specs
-
Standard headbox: 5-¾" (15 cm) wide x 7-¾” (20 cm) high for manual and motorized shades. Headbox will be bent steel or three-piece extruded aluminum. Dual Roller Endcaps used for mounting shade.
-
Large headbox: 6-½” (17 cm) wide x 8-½” high (22 cm) for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Ceiling brackets are used for this size.
-
Extra-large headbox: 8-22/32" wide x 7-3/4" high for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Dual Roller Endcaps are used for mounting shade.
-
Suspended or flush mounting available.
-
Dual Roller Pocket headbox is white (standard) or grey where visible at the ceiling line. Available with or without tile lip.
-
Accommodates: Motorized FlexShade, Clutch FlexShade, Battery Powered FlexShade, 24V FlexShade, and LightBloc w/Side Channels.
-
Shades may be coupled, minimizing wiring and motor use (not suitable with LightBloc).
-
Product designed for interior use.
ANSI/WCMA A100.1-2022 Child Safety Standard
Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022
child safety standard, all Draper window shades operated by a bead chain will be
furnished with a tensioned hold-down device that is permanently attached and
partially disables the product if not installed correctly. This hold-down should
be installed with tension on the chain.
All bead chain operated window shades will include:
- Permanently installed spring-loaded tensioned hold-down device
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using
appropriate hardware for the site conditions. Consult with contractors and builders as needed.
If the tension device is not installed with appropriate tension on the bead
chain, the shade will be rendered partially inoperable. If installed
properly, the tension device will prevent the creation of a hazardous loop
and
will maintain tension on the bead chain.
Approved permanent warning label
Learn more about the new child safety standard
At the link below, you can see more information about the new child safety
standard, mounting methods for the tensioned hold-down device, alternatives
to bead chain products, and more.
Click here for more information
Tensioned hold-down device
Supporting Documents
Click the
and
icons to navigate the folders. Click the document name to download.
Part Numbers
-
C177.249SA - Dual Roller Pocket Headbox, Manual Shades
-
C177.248SA - Dual Roller Pocket Headbox, Standard Motorized
-
C177.250SA - Dual Roller Pocket Headbox, Large Motorized
-
- Contact Draper for details
Related Motors & Accessories