Based on your detected country, we suggest the draperinc.com domain for the best experience.

SDN RS485 6 or 8 Button Wall Switch

Wall switch provides hard-wired in-wall control for SDN shades with 6 or 8 buttons, a priority system, custom engraving, and 8 dry contact inputs.

The SDN RS485 6 or 8 Button Wall Switch offers a hard-wired, in-wall control for SDN shading systems with 6 or 8 buttons. It connects directly to motors, removing the need for a central controller and ensuring reliable performance. The keypads use a priority system, allowing certain controls to override others. Available with default or custom engraving, each switch also features 8 dry contact inputs for sending commands to the system.
 

Product Specs

  • Dimensions: 1-7/16” x 1-1/2” x 4-1/16” (37 mm x 38 mm x 103 mm) (without wall plate).
  • Face plate dimensions: Standard Decora.
  • Mounting: Single gang.
  • LED: Red - Rear (power) (flashes when powered).
  • Front (status) (flashes when transmitting).
  • Directly control intelligent motors either individually, by group, façade or an entire building.
  • SDN is scalable, and suitable for both small and large projects.

ANSI/WCMA A100.1-2022 Child Safety Standard

Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022 child safety standard, all Draper window shades operated by a bead chain will be furnished with a tensioned hold-down device that is permanently attached and partially disables the product if not installed correctly. This hold-down should be installed with tension on the chain.

All bead chain operated window shades will include:

  • Permanently installed spring-loaded tensioned hold-down device
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using appropriate hardware for the site conditions. Consult with contractors and builders as needed.

If the tension device is not installed with appropriate tension on the bead chain, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain.

Approved permanent warning label

Learn more about the new child safety standard

At the link below, you can see more information about the new child safety standard, mounting methods for the tensioned hold-down device, alternatives to bead chain products, and more.

Click here for more information
Tensioned hold-down device

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

Skip Navigation Links.

Part Numbers

  • C112.146SA - SDN 6 Button Wall Switch
  • C112.147 - SDN 8 Button Wall Switch

Videos

Case Studies

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

   

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.

What type of installation?

What's your question?

Tell us about yourself.



Your Drape‍r contact information:

Need to contact someone immediately? Your Draper contacts are shown below.

Mitch Photo
Mitch Broome
Regional Sales Manager - Architectural Products, Midwest USA
mitch.broome@draperinc.com
765.856.1245
Logo Photo
Architectural Sales Consultant Team
Contact Info:
commercialshades@draperinc.com
800-238-7999
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman